Finally ready and available, BMW E46 race/rally front suspension arm kit. Complete kit with all nuts and bolt for assembly. Bolt on kit, you only need to weld two extra mounting threads to rear bracket, as DTM cars had. To xbrace you bolt special billet cromo fork. STD geometry. All welded parts are made from Cromo 4130 except rear bracket from S355 steel.
Cromo front track controlarm with M16x1.5 rosejoint on body side and 40x18mm spherical on wheel side, all cromo 4130. In-place adjuster for adjustment.
-Wheelside mounting with cromoshaft shaft with M16x1.5 and M12x1.5 nylock nuts
-Cromo tension arm with "stiff-joint" on TCA side, on body side M18x1.5 rosejoint. In-place adjuster for adjustment.
-Rear bracket has been drawn on CAD and lasercut from S355 steel Fits straight to original brackets, but you should weld extra mounting threads on to body like the DTM cars had, thread bungs comes with the kit
-To xbrace side spherical bearing in loop-pin, fork on tire side, +400% stronger than previous version
-You can shim the rear mounting up-down, so you can play with antidive
-To all rosejoints you will get reducers down to 12mm bolt
-To all joints mounting hardware with the kit, 10.9 grade M12x1.5 thread screws with nylock nuts
-TCA/Tension arm/rear bracket powdercoated. All other parts electroplated
Production sertificate for MOT inspection comes with the kit
Fits E46 (Not M3, it has separate product)