Rally Corsa Shop version of Toyota Yaris homologated arms package. Same geometrics but easier adjustability.
All welded parts CroMo 4130. All weldings done with TIG welded with proper filler and Argon. All parts are powdercoated. Arms are serial numbered and we keep record of all made arms. Production certificate will be delivered on your request.
- front reaction bars 25x2.0 tube, at front M16x1.5 LH cromo uniball, at rear M16x1.5 solid joint. Solid joint made from even stronger MOC410. The arm is in place adjustable.
- main arms 31.8x2.4mm tube (we will change to 32x2.0 in some point), body side uniball 16x1.5mm. Tire side 40/20mm cromo spherical with AE86 coned shaft for knuckle mounting. Note, you need to drill x-brace mounting hole to 12mm. For knife antirollbars a bracket on top of the arm. ssa mukana paksut prikat ja nylock mutteri
- locknuts included as reducers from 16mm to 12mm
NOTE! Buy spherical rubbet boots separatelly! We recommend rubbers for to keep dust away.
- 2x reaction arms + M16x1.5 sphericals and 16-12mm reducers and solid joint for TCA mounting, PRO version = inplace adjustable and 35x2.0 tubing
- 2x TCAs with M16x1.5 sphericals and locknuts and 16-12mm reducers
- high grade M12x1.5 bolt + washers + nylock nut for TCA-reaction arm mounting
- 2x coned shafts for mounting the TCA to AE86 knuckle
- 2x 40/20mm CroMo sphericals with circlips mounted in TCAs
- 2x weldable brackets for front mounting for the reaction bars.
- powdercoating and production certificate
Do not include:
- rubber seals