FI EN
Rally Corsa Shop Verkkokauppa
Toyota bump-steer 14mm AE 86 and KP61

Toyota bump-steer 14mm AE 86 and KP61

Product sku
1TO2002
Availability
Heti
Quantity

When you want to make optimal bumsteer to your car, this is the set you need. Optimal bumpsteer is rarely correct in street cars when its taken to racetrack. Adjustment is possible only if  you have this set.

Take away the original steering arm joint, put this piece to knuckle post and choose right uniball joint (heims joint). Then adjust the bumpsteer by shimming the height of the uniball in the shaft.

Read more below.

45,00 €
Add to cart
  • 14mm shaft diameter
  • 96mm max length
  • 10x1.25mm locknut on top (20mm long thread)
  • cone aprox 12.5mm from thinnest point, aprox 14.5mm from thickest (cone length aprox 20mm which is ment to have 4-5mm unused from the bottom)
  • 20mm key for to keep it unrotated when 10x1.25 nut is turned
  • aprox.26mm long 14mm section
  • bottom locknut 14x1.5
  • you need to make shim washers by yourself
  • in price comes 1pcs of shafts + nuts

Fits atleast (updted when known

  • Toyota Starlet KP 61
  • Toyota AE 86
Show more items
from Toyota

RALLY CORSA
SHOP

Marko Väisänen 

+358 400 945 771
marko.vaisanen@vaisaset.fi
 

Teollisuustie 10
71800 Siilinjärvi
FINLAND
 

Contact ›
Uniball.fi -verkkokaupan maksutavat

Mainostoimisto Semio | Tampere ja SeinäjokiWebio julkaisujärjestelmä, verkkosivujen ylläpito

KÄYTTÄJÄTUNNUS
SALASANA

Kirjautuminen

Kirjaudu sisään antamalla
tunnuksesi ja salasanasi.

Uusi asiakas? Rekisteröidy tästä.
Unohtuiko salasana?